110 m2 Steel House

In our products, completely domestic production materials are used.

PRODUCTION TECHNOLOGY: Material with S10326GD+Z, +AZ Erdemir quality no:320, S1332GD+Z, +AZ Erdemir quality no:350 and/or Erdemir quality no:1335 in DIN EN 1322 standard is used in the carrier system. Thin-Walled Galvanized C and U Profiles, which are drawn as one piece from Cad-Cam controlled fully automatic continue roll-form machines, are used.
ASSEMBLY: Wall panels, roof trusses, purlins and mezzanine assembly are made using Special Screws and Bolts.
STATIC ACCOUNTS: In accordance with the Turkish Standards and/or International Standards specified in Article 3; The suitability of the building for its intended use and the required seismic and static calculations according to the region where the building is located are made with Sap2000, CFS, STA4CAD, BRICSCAD, HAYESCAD programs according to the load values ​​determined in the projects and standards.
DURABILITY: The exterior cladding is CE certified (fire and water resistant) cemented chipboard (Betopan- Fibercement).
FOUNDATION CONCRETE: Concrete should be poured in accordance with the concrete plan (foundation dimensions) to be given by our company. Foundation design, static, foundation and floor covering will be done by the EMPLOYER. The building is fixed to the ground concrete with anchors and steel dowels. An iron raft foundation or a steel mesh foundation should be prepared on the hardened ground.

SNOW LOAD: 120 kg/m² , TS 498 (It changes according to the snow load and altitude where the building will be built)
WIND SPEED: 102 km/h (50 Kg/m²) TS 498
MEDIUM LOAD CAPACITY: According to TS 498, the building can be 200 kg/m² depending on the purpose and type of use.
EARTHQUAKE ACCOUNTS: Effective ground acceleration coefficient: Ao=0,45 (1st degree earthquake zone) Building importance factor (I=1) Live Load Participation Factor (n=0,3) According to the building use and type I=1 /1,2/ It is calculated as 1,4/1,5n=0,3/0,6.
THERMAL INSULATION: Thermal Insulation Regulation (8.05.2000)
SOUND INSULATION: TS 187 and TS 854 (DIN 4109)
FIRE RESISTANCE: DIN 4102 Regulation on Fire Protection of Buildings – 2002

OUTER WALL THICKNESS: ~ 140mm
OUTER WALL HEIGHT: 2800 mm
OUTER WALL FRAME: 140 * 45 * 12,5 (Dx51) Quality C Profile
EXTERIOR CLADDING: 11 mm OSB 3 Coating + Moisture barrier + 12 mm Decorative Exterior Coating (Fibercement-Betopan)
HEAT AND SOUND INSULATION: 120 mm 50 kg/m³ Rockwool Insulation
EXTERIOR WALL INTERIOR CLADDING: 12,5 mm +12,5 mm White Drywall Coating

INNER WALL THICKNESS: ~ 90mm
INNER WALL HEIGHT: 2800 mm
INNER WALL FRAME: 90* 45*12,5 (Dx51) Quality C Profile
INTERIOR CLADDING: 12,5 mm +12,5 mm White Drywall Coating
HEAT AND SOUND INSULATION: 80 mm 50 kg/m³ Rockwool Insulation

DRY / WET VOLUMES: 12,5 mm +12,5 mm White Drywall Coating
CEILING INSULATION: 80 mm + 80 mm thick Glasswool
SUSPENDED CEILING CONSTRUCTION: They are specially designed galvanized RAL 9002 electrostatic oven painted omega profiles.

ROOF COVERING: 0,50 mm thick metal creme coating (Red Ral 3009 – Green Ral 6020) color11 mm OSB 3 coating
CEILING FRAME: 90 * 45 * 12,5 (Dx51) Quality C Profile
ROOF CARRIER SYSTEM: 90* 45*12,5 (Dx51) Quality C Profile
Eaves and Eaves Ventilation: There will be 40 cm eaves on both sides of the building. Coating 10 mm Cement chipboard (Betopan – Fibercement) To prevent sweating, there is a ventilation grille on the forehead Vs of the scissors.
DREAMS: Metal streams will be placed. Our company is not responsible for creek breakage that may occur in places with heavy snow load.

MEASURE: 900*2000 mm / Steel Door
DOOR FRAME: 1,2 mm galvanized sheet (Electrostatic oven painted) (RAL 9002)
LOCK & HANDLE: Cylindrical lock / metal door handle in satin gray color

MEASURE: 800*2000 mm / Melamine Door
DOOR FRAME: 40 mm Wooden door frame and 85 mm melamine door trim
LOCK & HANDLE: Cylindrical lock / metal door handle in satin gray color

NORMAL / TRANSPORT WINDOWS: PVC windows specified in the project details are used.
IN NORMAL WINDOWS: 4+16+4 mm double glazing
ON WINDOWS: 4mm thick frosted glass

EXTERIOR: Double layer silicone exterior
INTERIOR: Double layer silicone interior paint
CEILING: Double layer of plastic paint

CARCAS: It consists of specially shaped profiles in rollforming machines. Arakat Steel construction consists of galvanized special twisted profiles.
FRAME TOP COATING: 16 mm Betopan (Flammable, not affected by water, B1 Class)
CAPACITY: It is taken from TS 498 according to the purpose of use of the building.
STAIRS FRAME: 90* 45*12,5 (Dx51) Stair frame made of Quality C Profile
STAIR COVERING: 16 mm Betopan (Flammable, Water-proof, B1 Class, Press Reinforced)

LIGHTING FIXTURES: Normal Space Residential, Normal Space Office, Wet Spaces and Outdoors are not covered.
CABLE: Sockets (3×2,5 mm² NYM), Lighting (2×1,5 mm² NYM)
SOCKET BUTTONS: Sockets, Switches

CLEAN WATER PIPES: High quality unbreakable PVC pipe is used
WASTE WATER PIPES: High quality unbreakable PVC pipe is used