What are the Differences Between Prefabricated House and Steel House?

Hello,

We wanted to touch on the subject that everyone is curious about,

What are Prefabricated Houses? How is it done?

Prefabricated Houses:

Prefabricated houses are practical structures that provide the opportunity to be quickly assembled by being shipped to the place where they will be installed after all the construction elements connection points and wall panels are prepared in the factory.

All carrier systems of prefabricated houses are produced from high quality galvanized steel sheets in state-of-the-art rollform machines.

Wall panels of prefabricated buildings are produced and shipped in factories as windows, doors or just walls, according to the project. Betopan is used outside the walls. If the inner insulation material is desired, rock wool can be made. EPS styrofoam is made as standard.

All materials of prefabricated structures are pre-production in the factory and prepared for loading.

Prefabricated House assembly time; For example, a one-story hundred square meter prefabricated house is built in an average of 1 week.

For example ; Our 100 m2 Prefabricated House with Campaign.

In prefabricated houses, the loss rates in dismantling and tooling operations are very low, around 10-15 percent on average, and reassembly is appropriate.

Steel Houses:

Steel houses are made in the factory by forming the cold galvanized steel with the latest technology rollform machines of the carrier steel systems. (as in prefabricated houses)

All galvanized steels used in steel houses are produced in different thicknesses as a result of appropriate static calculations.

The steel skeletons of the steel houses prepared in the factories are sent to the shipping address where they will be made as carcasses, and as a result of assembling and combining the carcasses with each other according to the plan and project, the steel is assembled and the steel frame of the building is made.

Installation of steel houses on construction sites takes longer than prefabricated houses. The reason for this is that the steel carcasses are first assembled, the steel house takes the form of the carcass, and then the steel surfaces are covered with osb, and then the coating materials suitable for the exterior are coated and the insulation materials are placed on the inner parts of the steel remaining in the building and the plasterboard coating is applied to the interior of the steel structures. It is among the reasons for the long duration.

Steel structures are demountable structures, but dismantling is more difficult and more casual than prefabricated structures.

While the casualty rate in prefabricated buildings is between 10-15 percent, this casualty rate in steel houses is even higher.

Installation time of steel houses ; For an average one hundred square meter single storey, the installation time will take 25-30 days including coatings.

And because of these, the steel house is made at 2 times higher cost than the prefabricated house.

You can reach us here for all the details; 0 (553) 905 35 10

So, additional information What are the advantages of Prefabricated Houses and Steel Houses?

The construction period is short and does not depend on the climate and season.
All costs are determined and fixed at the time of the contract.
It provides energy saving thanks to its strong thermal insulation.
Once installed, it can be dismantled and moved to wherever you want.
It does not need concrete other than the sub-basement (Floor Concrete). It can be used safely in all climatic conditions.
Shipping costs are low due to fewer and more controllable shipments.
The short delivery of the building (10-45 days) provides an advantage in terms of sales and rental income.
In practical ready-made structures, the foundation cost is low due to the lower total weight of the building.
Although the need for maintenance is almost negligible, the fact that it can offer unlimited solutions to renovation and change needs, and that all renovations and renovations are low cost and easy, keeps the value of the building high for life.
It is produced in a modular system. Since almost all productions can be applied in the amount determined in the project and with mechanical assembly, the waste and loss of the material are almost non-existent.
Since the insulation properties of all projects are designed according to regional and climatic data, the first expenditure on the building can pay for itself in a short time.