DETAILED PREFABRICATED HOUSE BUYING GUIDE

Ideal House & My Prefabricated House In this blog post, we will inform you in detail about what to do before and after buying a prefabricated house for 2024. Turkey's highest quality prefabricated house manufacturer company, Ideal Ev, will always be with you during the process and will continue to provide you with the most unique service before or after sales.

How to Buy a Prefabricated House?

Of course first of all PREFABRICATED HOUSE MODELS AND PRICES You have to click on the link and like a model :)

How Should Prefabricated House Concrete Be Prepared?

Ideal House & My Prefabricated House As, we present you a project with plumbing cavities and concrete features specified for the project you like. According to this project, you start the process of preparing the concrete floor. It is very important for the health of the house and to avoid wasting time by following the project given by us and preparing concrete where there is no difference in elevation.

– At least 40 cm is sufficient for installation, but a higher concrete floor can also be prepared by taking into account the weather and ground conditions of the area where the house will be built. In normal processes, 25 cm of stone fill (without sand or gravel), rebars and 15 cm of concrete may be sufficient.

– A cross measurement check is required for diameter.

– The poured concrete hose must be checked with a scale to examine the elevation difference.

Sample concrete floor project;

Sample prefabricated house flood concrete pouring process;

Ready-made water tank with a spirit level and poured concrete;

How to Install & Prepare Prefabricated House Screed?

• After the installation of the house is completed, an oil screed with a high cement content should be used to fit the concrete walls from the outside, covering the U-profiles fixed to the concrete with steel dowels, but not exceeding this height. Afterwards, we recommend using BTM Seal as insulation material. By applying Kalebodur and Kalekim applications, you can make the insulation most efficient.
• The most appropriate system would be to place the interior screed 1 cm above the U-profiles and at the door threshold.
• Since interior doors can usually be removed and placed outside horizontally without protection while screed is being applied, the sun both negatively affects the doors and gets dirty. Therefore, the doors should be kept in an upright position indoors. If the doors are kept outside in the sun and especially without protection, problems may occur, so we recommend that you be careful about this. At the same time, the doors must be numbered correctly when they are removed.

Prefabricated House Humidity Condition?

• Painting in winter can be more difficult and problematic than in sunny weather. That's why we recommend not painting in rainy weather.
• In case of mastic cracks or cracks on the sides of the doors 2 years after the building is installed, mastic and minor painting can be done again.
• As of article 2, we recommend painting every 4 years, but of course this period varies depending on usage and demand.
• Since water-based paint is used, the walls can be washed.
• To prevent moisture, 50×25 cm plastic grilles are attached to the overhead trusses. (If your house has a hipped roof system, there is ventilation on the roof)
• It would be best to choose high skirting boards for corners inside and outside the house.

So why Ideal House & My Prefabricated House Should You Prefer?

• We use the highest quality prefabricated house materials.
• We work with masters with a minimum of 10 years of experience.
• Our roof trusses and H profiles are made of 1 mm and our corner posts are made of 1,5 mm. All our materials vary between 0.8 mm and 1,5 mm.
• Our warranty period is 2 years free installation and 10 years service.
• We use green plasterboard in bathrooms both to protect against moisture and to help the tiles hold on better. While many companies prefer white plasterboard used in other rooms due to its affordability, we provide green plasterboard.
• In case of any after-sales disruption, we provide a unique after-sales service to our customers due to the wide service network we have.
• We currently offer quality double-hung windows to you.
• Our exterior steel doors are preferred to be of much higher quality than the doors offered by other companies at standard standards.
• In our double-storey houses, we overcome the squeaking problem by specially applying a 25 cm C profile and a crossbar at 62,5 cm and then covering it with 16 mm betopan.
• All of our walls will be coming to the installation area via electrical channels, so you will have much more freedom in choosing extra sockets or changing locations before the installation is completed.
• In each of our homes, we offer patio covered sockets, TV installation, air conditioning installation (if desired), stove and chimney apparatus, sconce installation, double opening & sill windows, which we do not reflect in our prices.

How to Maintain a Prefabricated House?

• We recommend gutter cleaning every year.
• Sealant removal every 2 years
• We recommend constant ventilation of the house
• Adjusting window settings

How Are Prefabricated Houses Heated?

• air conditioning system
• natural gas system
• stove system
• Underfloor heating system

Assembly Team Meal & Accommodation Costs and Conditions

• If we need to make a rating, we want our masters to be provided with the comfort of a 3-star hotel or a teacher's house.
• As you can imagine, since our masters work physically, they need much more than the daily calorie requirement before or after the installation, so they need to eat 3 satisfying meals to close the calorie deficit.
• If our customers do not want to deal with this process, we, as Ideal Ev & Prefabrik Evim, can cover the food, accommodation and transportation costs.

Can Kitchen Cabinets Be Hanged in Prefabricated Houses?

• Of course, systems such as kitchen cabinets, air conditioners and televisions can easily be hung on the cabinets in prefabricated houses.
• Self-tapping screws are used in our H profiles, and pointed furniture screws are used for kitchen cabinets.
• Screws should not be placed at the socket level of the house because the electrical cable may be damaged.

Tile Application in Prefabricated Houses

• It is recommended that a rough transition primer should be applied first and then tile application should be applied.

Plasterboard Application in Prefabricated Houses

• If our customers request, as Ideal Ev & Prefabrik Evim, we can apply plasterboard from the inside to hide the H profiles that appear in our standard prefabricated houses, and thus you can achieve a more aesthetic appearance. This application will of course create an extra pricing, but our customer can do this application if he wishes. Especially if our customer wants to have the wall plasterboard installed later, he should inform the seller about this before the sale, and it would be best to inform the sales consultant about the issue both before and during the plasterboard application outside.

Coating Application in Prefabricated Houses

• If our customer wants a more aesthetic appearance and requests that the h profiles be hidden, Yalıpan or Taşonit application can be applied.
• There must be a vent in the coating application to prevent moisture.
• If eaves and fascia closure is required and there is a concrete height of 1.5 meters, a manlift will be required.
• The foreheads are 16 mm, the eaves are 8 mm and the corners are 14 mm.

Transportation and Assembly of Prefabricated Houses

40 Wheels between 60m² and 10m²,
Centipede between 60m² and 90m²,
90m² and 160m² are transported by truck.

• Information about whether there is a suitable road on the route of the loaded vehicle to the installation site should be shared with the seller.
• If there is no road, vehicles such as tractors and manitou must be arranged to transport the materials. Our customer bears these costs.
• Weather and ground conditions are very important for the safety of the installation team. The customer should inform the sales consultant about this and support it with photos and videos if necessary.
• The concrete area must be empty.
• The molds need to be dismantled and made ready.
• The sides must be empty and available so that the materials can be left in the appropriate areas after being unloaded from the truck. If there are problems such as mud & slime, our customers need to solve them.
• Altitude, wind and snow load values ​​should be shared with us. In this way, the sales consultant will inform you whether an extra reinforcement or a change is required (the thickness of the roof trusses may increase, the roof slope may change, etc.).

What are the materials used in prefabricated houses?

If you would like to get more technical information about the materials used in prefabricated houses, you can request a pdf from our lines 0553 905 35 10 & 0553 900 35 10 and answer your questions. prefabrievim.com You can find it on or get support from our technical team :)

Prefabricated House Installation Video