How is a Prefabricated Pool made? Prefabricated Pool Prices

Hello everyone,

We wanted to write an article where you can access detailed information about how to make a prefabricated pool and its prices, which are frequently asked to us.

How is a Prefabricated Pool Made?

Prefabricated pool projecting steps start with the construction phases. After the project is done by a team of experts in the field, other stages are concluded with competent employees. It is important to use quality products in all pool construction stages. During the installation, it is completed by combining all the experience and professionalism. Each stage is carefully and carefully controlled. Prefabricated pool construction is explained step by step with explanations below.

1. Project Phase

The first stage is the project stage. First, the area reserved for the pool is determined. Measurements of the determined area are made in detail. The professional team designs a pool by taking the ideas of the customer suitable for the area. All details such as the color, marble and mosaic of the pool are decided at this stage. The depth of the pool is determined. Project details are completed in line with the demands and requests of the customers. Project and technical drawings are carried out by experts in the subject.

2. Excavation Phase

The first important detail after the project details is the excavation. In the designated excavation area, the excavation work is carried out in detail to ensure that the pool is filled correctly and to set the pool correctly. At the excavated site, approximately 10 meters more than the determined pond depth is excavated. In this way, space is made in the stone base material. It is an important detail that the difference is about 10 meters. After the necessary measurements are made, the excavation depth is completed in accordance with the pool level.

3. Prefabricated Pool Floor Preparation Stage

The floor is leveled and gravel is laid on the floor. Rust is given on the floor and then steel mesh is laid. After the excavation process, approximately 20 cm of concrete is poured on the bottom of the pool. After the concrete is poured, the prefabricated pool floor area becomes perfectly level and smooth. Concrete is left to dry.

4. Plumbing and Pool Floor Placement Phase

The prefabricated pool brought to the preparation area is assembled correctly. The rear support legs holding the pool are fixed to the concrete floor. The engine room is placed on the edge of the pool. Plumbing work begins. All these processes are carried out by our own methods. In this way, various problems that may occur are prevented. In order to fix the pool body, approximately 30 cm of concrete is poured on the rear support legs of the pool. 15 cm of concrete is poured to fix it in the engine room.

5. Fill and Fill Phase

When the pool reaches the appropriate level, the stone filling process begins for the parts outside the pool. At this stage, the process of filling the water and the filler at the same time is done. In this way, the pressure in the area can be adjusted. Again, this process is one of our preferred methods.

6. Pool Floor Laying Stage

First, steel panels are laid on the base and then non-slip felt. Steel wall panels both speed up the process and are more economical. The coating process begins with a 1,5 cm liner, which is a ready-made coating material. Several layers of liner coating are performed on top of each other. It is passed over the junction points again. Sticking to the floor is performed with special robots. All parts of the system assembled on the liner material are gasketed. Thanks to the double-sided gasket used, 100% impermeability is ensured. Liner assembly is completed. After all the operations, the pool safe is revealed.

7. Landscaping and Pool Use Phase

At this stage, the pool is filled with water and backfilling is performed. Special concrete prepared to create the patio is poured. Additional designs requested by the customer are made in the pool. Environmental concrete is poured in accordance with the customer's demand. Covering material is laid around the pool. Then you can start using the pool as you wish. The pool is filled with water. Make sure that the filter system and the pump are working. The water balance is clearly controlled. Since liner material is used, there is no need to brush the walls and floor. After all controls, the pool is delivered to the customer.

Advantages of Prefabricated Pools

Prefabricated pools are advantageous in many aspects, from cost to construction time. The total cost spent in prefabricated pool installation will be much more affordable than reinforced concrete pools. Prefabricated pools offer more heat savings compared to vinyl and concrete pools in the long run. Compared to vinyl and reinforced concrete pools, the construction phase is completed quickly. You will not encounter problems such as algae that occurs in other pools in prefabricated pools. Prefabricated pools without algae problems are also very easy to clean. Fiberglass, which is a good insulator material, is especially used in pool construction. In this case, the cost of heating the pool becomes more affordable.

Fiberglass, which is a flexible and strong material, does not cause problems such as holes or cracks as long as it is not directly hit. It does not need renewal and periodic maintenance such as concrete pool and vinyl lining. It is faster and easier to repair than concrete pools and is easier to repair. Repairs such as repairing boats and prefabricated pools are completed in a practical way. Many details can be included in the design. Details such as steps, benches, sun terraces and bays can be added according to the customer's request. It is quite easy to install. It is produced using new generation technologies. The cost of coating is different compared to tile or mosaic covered pools.

The reason why there are pre-filters everywhere is to prevent the pipes from clogging. According to your personal preference, the prefabricated pool will provide you with a pleasant environment with blown vehicles that give the effect of a jacuzzi. The aesthetic image is quite high. It offers the opportunity to choose above-ground models instead of the underground prefabricated pool where excavation is prohibited. The closed circuit of the treatment system provides treatment service in the quality of drinking water.

As a result, if we look at; 

• Prefabricated Pools are more suitable products in terms of cost.
• Prefabricated Pools provide better thermal insulation.
• Prefabricated Pools Provide a better seal.
• Prefabricated Pools A faster cleaning can be done.
• Repair of Prefabricated Pools will be much more convenient.
• In Prefabricated Pools, like other pools, all additional systems can be easily installed.

Prices and Models of Prefabricated Pools

Prefabricated pool prices may vary according to certain features. Personal preferences, the condition of the area to be used for the pool, the model, the materials used in the construction of the pool, the quality of these materials used and many other factors may be different criteria in determining the price. Customers who want to have their own pool installation can eliminate the installation cost. However, at this stage, it may encounter many problems. It may be beneficial to get support from a professional company in order to avoid any problems at any stage, from projecting to installation and delivery. If you prefer a quality and reliable company, it can respond to you instantly when there is a problem in the future processes. In this way, your pool can be delivered to you in a shorter time and more reliably.

The price and quality of the materials used in the construction and installation of prefabricated pools may also vary according to exchange rate changes. The variety of materials and special brands can affect the price. If the pool is preferred, the material to be used will increase, so the cost will increase proportionally. The width of the field also creates a difference in determining the price.

Different techniques and procedures can be applied during the prefabricated pool construction phase. This can be considered as a factor in the different prices. It has many options such as oval, square, rectangular. At the same time, thanks to modern production techniques, different designs can be made according to the width and length of the area where the prefabricated pool will be built. Pool tanning ledges can also be made. The pool can be preferred underground or above ground. Many prefabricated pools of various capacities and sizes can be manufactured. There are different types such as steel polyester and panel pools.

For all detailed information, you can contact us at 0553 905 35 10.